 | | CL400 Loader (Order Bucket
Separately)
Curved boom construction allows for better bucket visibility and clear sight lines. Features a 72”
square back bucket with a capacity of 10.6” cu. ft. QuickAttach™ system and optional QuickAttach™ makes
attaching and removing the loader quick and easy. QuickAttach™ pallet forks, bale spear and high-volume bucket
also available. |
 | | CB85 Backhoe
QuickAttach™ system allows
you to install or remove the backhoe in minutes as it sets in the cradle with two locking pins. Single Power Beyond
kit powers the backhoe for reliability, control and smooth operation. Dual swing cylinders allow for precise control
of backhoe along foundations and provide more power for backfilling. Curved boom assembly gives the operator better
sight lines when digging.
|
 | | FML72 Rear Finishing Mower
Features an 8-gauge
deck housing and reinforcement plate under the spindle assembly. Rear discharge disperses cuttings cleanly and evenly.
Comes with a wide range of cutting heights from 1” to 5” for clean cuts on all lawns. Gearbox is highly
engineered and rugged with straight-cut gears, casted cooling fins and completely enclosed seals. The four durable
composite rubber caster wheels give a perfectly level cut while eliminating the worry of flat tires. Category 1, full
floating deck allows the mower to follow the contours of the land.
|
 | | RC72 72” Rotary Cutter
Deck housing
is constructed from 10-gauge steel and reinforced with a 10-gauge plate under the gearbox assembly. Features a cutting
height adjustment from 1” to 9-1/4” with oval stump jumper. Heavy-duty drive line with shear bolt protection
transfers power smoothly and protects the valuable components of the tractor. Hardened spring steel blades are mounted
on high-carbon steel rotors. Floating top link allows for rotary cutter to follow the contour of the land for clean
and even cutting. Laminated tail wheel is puncture resistant and long wearing in harsh brush-cutting conditions.
|
| | |
|
 | | RT74 74” Tiller
Designed as a 3-in-1
tiller to combine the capabilities of a center tiller, an offset tiller and a reversible rotation tiller to deliver a smooth,
finished surface under any ground condition. Offset up to 22”, providing visibility when tilling along driveways
or structures. The 32 heavy-duty knives blend the soil to create stronger root systems. Adjusts to a maximum depth
of 7-1/4” and has a working width of 74”
|
 | | RB84 84” Rear Blade
The ½”
steel A-frame is welded to two 4” x 4” steel beams with ¼” thick walls that are fully reinforced.
The rotation plate is constructed from 5/8” thick steel. The 5 forward and 5 reverse positions allows for precise
and consistent grading. The angling plate is constructed from ¼” steel. The 4” outer tubes
and 3.5” inner tube with ¼” thick walls are center cap welded. The 3-position tilt adjustment provides
a wide range of applications. The ¼” rolled moldboard is attached by a ¼” mounting plate.
The ½” x 6” cutting edge is hardened for long life and reversible for even greater life expectancy.
|
 | | BS72 Box Scraper
Heavy-duty A-frame is constructed
from ½” thick steel for greater control and strength during grading and backfill operations. The A-frame
and box are attached with a 5/8” steel frame making the scraper extremely rigid for uncompromising control. The
4” x 4-1/2” cross beam is the main structural component. The box is made out of ¼” thick steel
with ¼” thick reinforcement brackets at each corner. The 5/8” hardened steel ripping shanks with
replaceable tips allow them to dig into the toughest soil conditions. Reversible hardened blades give longer life.
|
 | | LR84 Landscape Rake
The A-frame is constructed
from ¼” steel welded to a 3” x 3-1/4” beam for extremely rigid and precise control of the attachment.
The rotation plate is constructed from ½” steel. The 5 forward and 5 reverse positions add versatility
for a wide variety of chores. The superior construction of the ¾” steel angle iron mounting plate gives
rigid support to the tines. The hardened tines are 5/16” x 1” and spaced 2” on center for a high resistance
to wear and a cleaner collection of material.
|
| | |
|
 | | PHD200 Post Hole Digger
Heavy-duty, 2-7/8” x ¼” walled construction of the boom and 2-3/8” x ¼” wall yoke
allow for extra strength in all soil conditions. Grade 2 shear bolt provides greater protection to the tractor drive
and gearbox assembly. Reinforced mounting collar with double flighting keeps the auger end from wearing out. Hardened
replaceable cutting knives allow for fast, clean digs and easy maintenance. Dependable cast-iron gearbox with 540 RPM
gives constant digging power. Large 2” output shaft allows for long life in any soil condition. |
